Loading Auctions

« All Auctions

  • This auction has passed.

Bailey Metal Fabricators, Inc. Surplus Iron & Equipment Online Only Auction

Monday, July 25, 2022 @ 6:00 pm

Bailey Metal Fabricators, Inc. Surplus Iron & Equipment Online Only Auction
Starts July 15, 2022 8:00 AM Closes July 25, 2022 at 6:00 PM
Located: 807 N Rowley St, Mitchell, SD 57301
Metal Benders, Miller Welders, Miller Weld-a-Round table, Lots of good used dimensional metal drop off pieces, Parts, Tools and misc. items.
For questions about auction items contact Greg @ 605-999-4306  For Auction questions contact Steve Larson @ 605-770-9818 or Justin Dean 605-999-4239.

Pickup Dates: July 26 & 27, 2022 from 10:00 AM to 4:00 PM each day or by Appointment.

Click Here to go to the Bidding Page!

Miller Welders, Benders, Weld A Round welder, Tools & Supplies
(Surplus equipment, trading out for newer models.)
Miller Weld around table (welds in a circle) w/ Miller 24 Vlt constant speed wire feeder
Montgomery Sheet & Plate Fabrication Tubing Roller Model 22 ANG RLL
Miller Syncrowave 351 Tig Welder CC AC/DC welding power source w/ Coolmate 4 water coolant system
Miller Model CP-250 TS w/ wire spool feeder, no leads.
Miller Maxtron 450 CC/CV DC Inverter Arc welder w/ wire feeder & gun single phase/3 phase
Miller CP300 DC Arc welder power source w/ Miller wire feeder, no gun but no welding leads 3 phase
Miller Coolmate 4- Water Coolant System; Bosch rotary hammer core bit 2″ & 3 1/2″
Erico Used Stud Welder- No leads or guns, worked when it was used last
Pallet of Welder Leads, Guns, Ground Cables and Clamps
Welder parts including .09 mm Tweeco tips and Door Latches
Harrington Overhead Jib Crane Motor and Trolley AS-IS
2 Motors need work 1 – 7 1/2HP 230vlt, 1 – 2 HP 110-230 vlt single phase
Rapistan DeMag Belt Roller w/ multi drive DC motor control
DeWalt Rotary Hammer Drill 1″ w/ case; Makita Cordless drill w/ battery & charger (AS-IS)
Makita 4″ palm sander w/case 110 vlt; Makita Power Nibbler w/ case 110 vlt
2 Empty Dewalt Cases; Makita 1/4″ driver 12 vlt in case, no charger
Makita Router w/ case 110 vlt; Milwaukee Super Sawzall w/ metal case 110 vlt
Lift Tech Trolley Bridge controller – parts; Sioux Heavy Duty drill, Milwaukee drill (needs cord)

Metal/Aluminum – Flat, Channel, I Beam, Square & Rectangle Tubing
24- Aluminum Dimensional Tubing (3′ Long x 4″x 1″) and Misc. aluminum plating
Channel Iron 1-C8x18.75 5’2″, 1 – C8x18.75 7’4″
Channel Iron 1- C12x25 5’6″, 1- MC12x10.6 7’4″
Channel Iron 1 – C10x15.3 5′, 1 – C10 x 25 3′, 1 – C10x25 3’6″, 1 – C8 x 8.5 6′
Channel Iron 1 – C15x33.9 5’1″; Channel Iron C15x33.0 4’2″
Channel Iron C12x30 8’3″; I Beams 1 – W8x24 6’9″, 1 – W8x24 6’2″
I beam 7’6″; I beams 1 – W6x9 6’8″, 1 – W6x8 5’4″, 1 – W6x8 6’2″
I Beam W14x61 10′ 3/4″; I Beam W12x19 5’11 1/2″ 12″ tall
I Beam W8x18 5’10 1/2″L x 8″ tall; I Beam W10x22 8′ 5 1/2″L x 10″ tall
I Beam W16x26 7′ 1 1/2″ x 16″ tall; I Beam W14x22 7′ 3 3/4″ Long x 14″ tall
Square Tube 8″x8″ x 3/8 14′ 1 3/4″; Channel Iron 12″ wide 6′ Long
Rectangular tubing 3/8″x12″x4″x50″; Rectangular tubing 12″x2″x1/3″ 5’9″ L
Square tubing 2 – 4″x4″x1/4″ (1- 6’6″, 1 – 5′ 9 1/2″)
Square tubing 1- 4’x4″x3/16″ 6′ 1 3/4″L, 1 – 3 1/2″x 3 1/2″ x 3 /16″ 7’L, 1- 4″x4″x3/16″ 3′ 11 1/2
Bundle of Rebar 1 1/4″x10’ approximately 22 sticks – sold one money
Metal railing 3’6″ tall x 7’10″L x 2′ 3 1/2″L (L shaped rail); 2 Hand rails 3’8″ Tall x 3’8″ L
Black metal railing 2′ 7 1/4″ tall x 3′ 9 1/2″L; 3 ea. 1″ flat steel 5/16″x 20’L
3 – Channel Iron 1-MC10x8.4 10′, 1- 7″x2″x 4′ 4 1/2″ L, 1 – 2 1/2″x10″x 8′ 10″L
3 Channel Iron: 1 – C10x15.3 x7’8″L, 1 – C10x15 x 6′ 7 1/2″L, 1 – C10x15 x 6′ 7 1/2″ L
Red Angled Iron 5 1/4″H x 10″ L; Round Pipe 12″ D x 3′ 10 1/2″ L
4 round pipe 2″ x 10’L; Pallet of misc. sizes of Channel Iron
Pallet of misc. square & rectangular tubing
Pallet of misc. sizes of Channel Iron
Pallet of 1 1/2″ x 15 1/2″ triangular paddles (5 pieces); Roller racking
Rebar 12 pieces 19’9″L; Angle Iron 3 – 1 2/3″ x 20’L, 1 – 1 3/4″ x 15’5″L
Pallet of Flat/Angle and misc. iron (Farmers Iron) See pics
Bent round tubing, 2 Hose reels; Rectangular tubing 12’x6’x1/4″ x 5’1″L
Rectangular Tubing 8″x12″x 1/4″ x 8’L; Rectangular tubing 8″x12″x1/4″ x 9’4″L
Pallet of Square tubing 8″x8″x1/2″ from 4′ to 5’7″ long
Pallet racking side rails 10 pieces 2000# capacity rails
Pallet of misc. iron, tubing, Hose & Flat Iron (Farmers Iron)
Pallet of misc. perforated metal – various sizes & shapes
Perforated Stainless Steel 4″ floor drain covers; Pallet of Assorted round tubing
Pallet of Assorted rectangular tubing (Farmer Iron)
8 pieces of Stainless Steel grate 14″ W x 9′ 11 1/2″ x 2″ squares
Pallet of Misc. flat & angle iron (Farmer Iron)
2 Pallets of Misc. square iron (Farmer Iron)
Pallet of Assorted angle iron (Farmer Iron) & Aluminum I Beam 5″x6′ 9 1/2″L
1/2″ I Beam W14x43 11′ 1 3/4″L; 1/2″ I Beam W21x62 8′ 5 1/2″
I Beam w/ post 7″x6 1/2″x4′ and 4″x28 1/4″ tall post
4″ Pipe x 13′ 3 1/2″ w/ 1’x1′ base plate; 2 Rails 3 1/2″ base x 10′
Channel Iron 3″x10″x142″; 3 – I Beams 2 1/2″x10″x10′
I Beam 4″x10 1/4″x92″L, Channel Iron 1 1/2″x12″x10′
1/2″ Rectangular Tubing 10″x14″x82″L; Channel Iron 3″x12″x115 1/2″
I Beam W8x18″ 5″x8″x97″; I Beam 4″x12″x152 3/4″
Channel Iron 2 1/4″x8″x121 1/2″; 3/8″ I Beam 5″x13 3/4″x 110 3/4″
1/2″ I Beam 7 1/4″x16″x135″; 1/2″ I Beam 10″x10″x13 3/4″
1/2″ I beam 8″x12″x115 3/4″; 1/4″ Rectangular Tubing 5″x10″x83 3/4″
2 – W10x9 I Beam 2 3/4″x10″x82 3/4″
1/4″ I Beam 2 3/4″x4″x97 1/2″, 3 Angle Iron 2″x2″ (2-71″, 1-84″)
Various sizes of galvanized grates & some metal grates
Various sizes of metal grates (see pics); Metal Grate 1″x7 1/4″x150 1/2″
Aluminum Camper window cut out (both sides)
Misc. Aluminum sheeting, see pics for sizes and quantities.
2 – 4’x8′ sheets of aluminum; White Aluminum sheets
15 ea. 1/4″ 3″x3″ x 20′ square tubing – Sold 15 x money
18 – 1/4″ Perforated Steel 11 ga. 48″x52″ (Sold 18 x Money)
Perforated metal; 45 Pieces of Misc. sizes of Heavy Flat Iron 3-4 ft long Approx. 1300#

Misc. Equipment & Supplies
NEW- Dexter 8 Lug 7000# Axle; 2 – 2″ Receiver hitches a 4″ and a 6″ drop
2 – 2″ Receiver hitches with 2″ balls 4″ and a 8″ drop; Chain Hoist
2 -Bridge Crane Gear Drive Motors-NEW
Partial Roll of 14-2 Romex Wire; Misc. Weather Stripping, Hoses, and Split Loom Flexible Plastic Conduit
Partial Roll of 3/8″ Air Brake Hose; Used Heavy Duty Cord w/Twist Lock Ends
Steel Pipe Fittings- Misc. Sizes; Spring Door Latches; 2″ Ball Hitch and Chains
Aluminum Tank (size) 12″x 21 3/4″x 17″; 2 Used Hydraulic Cylinders
2 Aluminum Hydraulic Cylinders; Aluminum Stand 3′ x 42″
Misc. Hydraulic Filler Caps and Hydraulic Hose Fittings with some misc. hooks
Box of Used Lincoln Air Couplers model 815; 4 New Lincoln Model 815 Air Couplers
4 New Lincoln Model 815 Air Couplers; Large Misc. Sizes of Steel Pipe and Fittings
Metal Rack 18″ wide x 42″ tall and 3 Banister Rail Samples that are 20″wide x 42″ tall
Large Steel Ramp Springs- New; Steel Plow Knock-Off Tips; 3M Portable Grinder Discs
B&W Gooseneck Turn Over ball hitch – Fits Dodge; Several Used Inline Air Filters
4 Aluminum 8 Bolt Rims- Came off a 2013 Dodge Ram (1 has been repaired)
2 – Large Used Concrete Blanket; Air Paint Sprayer w/Hoses
Fan w/Motor; Weather Stripping, Air Hose Reel, and a used Square D Box
2 Propane Bottle Clamps; 3 Steel Misc. Brackets; Oxy-Acetylene Tank Holders
Steel Cover Plates- 2 rectangle (38″x 16″) and 1 Round (23 1/2″ in diameter)
2 Fork-lift Tires and Rims; 2 Used Hydraulic Cylinders and misc. hoses
ST 235/85R16 Used Tire- 10 Ply; Misc. Sizes of Ready Rod
Protective glass; Misc. round pipe misc. sizes; 2 Concrete weights
Sledge hammer head, Pointed pounder; Respirator mask and extra cartridges

Decorative Rail Rods & In-Lays
Several Aluminum Ornamental In-Fills; Hand Forged Posts Brackets- 4″
Post Caps and Base Plates; Misc. Sizes of Steel Rod; Ornamental Base Plates
Misc. pieces of Expanded Metal and Steel; Several Steel Tabs
Several 3″ I.D. Aluminum Rings; Ornamental Steel In-Fills; Steel Ornamental In-Fills
15 pcs – 44 1/2″L Decorative Railing In-Fills; 19 pcs – 44 1/2″L Decorative Railing In-Fills
14 pcs – 46″L Decorative Railing In-Fills; 100 pcs – 45″L Decorative Railing In-Fills
20 pcs Bent Railing Decorative In-Fills; 27 pcs Decorative Railing In-Fills
20 pcs Decorative Railing In-Fills; 27 pcs Decorative Railing In-Fills
15 pcs Decorative Railing In-Fills; 17 pcs Decorative Railing In-Fills
Pallet of Decorative In-Fill’s & Misc. Decorative railing
Pallet of Decorative railing; Pallet of Decorative railing
Metal hanging signs w/arch & misc. iron
34 pcs Pallet of Decorative railing
43 pcs Pallet of Decorative railing

Auction Company

Dean / Edwards & Associates, LLC
Phone:
605-999-4239
Email:
deanedwards@santel.net
View Auction Company Website

Other

Owners
Bailey Metal Fabricators, Inc.
Scroll to Top